Dewatering screen - Baichy Machinery

Product Center / Sand Making Equipment / Dewatering screen

Dewatering screen is a kind of linear dehydrated medium vibrating screen. It is used to remove excess moisture in fine aggregates and sand and you can achieve moisture content as low as 8%.

<10mmFeed Size
1.6-15kwMotor Power
30-250 t/hProcessing capacity

Get Quotes Leave Message

60S Quick Response
30Min Technical Reply
24H Design Proposal
Email:[email protected]

What is dewatering screen?

Dewatering screens are typically single deck or two decks with linear motion screens utilized to dewater fine aggregates prior to stockpiling. They are typically fed a sand and water slurry with a maximum feed size of 10 mm (3/8”), utilize urethane screen media and will typically produce a finished product with an approximate moisture content of 8– 15 percent . Dewatering Screen is widely used to sand and stone washing plant, coal preparation plant, sludge recycling, mineral processing plant, tailings dry discharge and more.

Why choose dewatering machine?

1. The motor is easy to replace, and the rubber spring on the base has a shock-absorbing effect and can be dehydrated cleanly.

2. Can be adjusted according to yield and moisture content. The side plates of the machine body are reinforced with plates, and the discharging materials are supported by triangular steel plates.

3. The vibration motor is fixed with high-strength bolts, and the screen plate has reinforced ribs.

4. For products with low mud content, the dewatering screen can also be used directly without sand washing, saving user costs and achieving the same effect.

Get Price List

High Quality

Vibrator is mounted on the side plate, which provides a good stress condition.
Customized Design

The screen plate adopts modular polyurethane screen plate, which requires no bolts and reduces clogging. The screen holes can be customized as needed.
Good Performance

Specially designed frequency, amplitude and low power consumption enable continuous operation 24 hours a day.

Product features

Dewatering Screen can be added any sand washer to drastically cut moisture content, leaving you with a drier product that you can sell sooner.

Working principle

Dewatering screen adopts double vibration motor as power supply. The two motors that rotate synchronously and reversely and centrifugal force are produced by two groups of eccentric block. This makes the screen body periodical to-and-fro moving along the direction of straight line, which is for the purpose of dehydration. The slurry passes through the screen and becomes under the screen, while the fine materials are blocked by the screen to form a filter layer and are affected by the vibration force. Counter-rotating motors create a motion that conveys solids to the discharge end of the screen as water drains through the screen media.

Specification

Model	Max Feeding Size(mm)	Motor Power (kw)	Capacity (t/h)	Dewatering Screen		Overall size(mm)
Model	Max Feeding Size(mm)	Motor Power (kw)	Capacity (t/h)	Spec(mm)	Area (m2)	Overall size(mm)
ZSD1225	≤10	1.5*2	30-80	1200×2500	3	3085x1590x1439
ZSD1236	≤10	2.2*2	30-80	1200×3600	4.32	3677x1590x1600
ZSD1530	≤10	1.1*4	80-120	1500×3000	4.5	3260×2220×2280
ZSD1842	≤10	2.2*4	100-140	1800×4200	7.56	4120×2520×2600
ZSD2445	≤10	11*2	140-180	2400×4500	10.8	4703×3737×2950
ZSD2460	≤10	15*2	140-180	2400×6000	14.4	6548×4200×3400
ZSD3048	≤10	22*2	200-250	3000×4800	14.4	4959×4518×3550