How should we do to improve HP cone crusher efficiency in stone crushing plant

 

In the process of HP multi-cylinder hydraulic cone crusher working, the main work control mode is the change of the feeding amount. So in the specific work process, if the feeding amount is large, the driving power requirements will be large.

 

In order to ensure the quality of cone crusher work, the power should be controlled at 75% ~ 90%, its maximum can not reach the rated power. At the same time, the operator should strictly avoid the crusher in the state of low power operation, if a must, the operation time should not exceed 5s. In the specific field crushing operation, the power of the crusher must reach more than 40% of the rated value.

 

 

 

In working site, if the operation time of cone crusher exceeds 30min but still cannot feed, it is necessary to shut down the crusher temporarily and start it again when it can feed.

 

In stone crusher plant working, the radar level meter can be used to detect the material level in cone crusher chamber, or it can be used as a device to control the signal input of the material quantity control loop in the crusher. When the material in the crusher chamber is crowded, the drive power can be further optimized by reasonable adjustment of the discharge port.

 

For example, after the discharge port of the crusher is increased, the driving power of the given material level of the crusher will be reduced, and the feeding amount in the crusher chamber will be increased; When the discharge port of the crusher is reduced, the driving power of the given material level of the crusher will be increased, and the feeding amount in the crusher chamber will be reduced.

 

In general, the height of the material in the chamber should be more than 300mm above the parting plate, and the driving power should be kept stable, controlling it in 75% ~ 90% of the rated value.

 

 

 

The stone crusher plant is used for producing sand, rock and stone for construction, highway, railway and other applications. Cone crusher is an importable secondary crushing equipment in stone crusher plant. Routine maintenance is required to ensure cone crusher efficiency and prolong service time.

 

 

HP hydraulic cone crusher has played a good role in many fields today. Compared with the traditional stone crusher, the installation of the multi-cylinder hydraulic cone crusher is more simple and convenient, and its working efficiency and working quality are higher. In the production, to the multi-cylinder hydraulic cone broken field application control, targeted operation, improve the production efficiency and quality of equipment. More information, welcome to contact us: [email protected]

 

 

People Also Frequently Asked For-FAQ:

1.What is the purpose of a cone crusher?

Cone crushers are popular rock crushing machines in aggregates production, mining operations, and recycling applications. They are normally used in secondary, tertiary, and quaternary crushing stages.

2.What is the difference between cone crusher and impact crusher?

The main difference between an impact crusher and a cone crusher is that an impact crusher uses impact force to crush material, while a cone crusher uses pressure to crush material. Impact crushers typically use high-speed rotating hammers to crush material, while cone crushers use a spinning conical head.

 

 

3.What are the main components of a cone crusher?

The main components of a cone crusher include the main shaft, mantle, concaves, cone, eccentric bushing, drive, crown gear, frame, and tramp release mechanism (mechanically or hydraulically actuated).