Impact crusher PF1010 is a small and medium-sized impact stone crusher. It is composed of tie rod, front impact frame, back impact frame, impact plate, plate hammer, horizontal shaft rotor and other structural combinations. It adopts keyless connection, simple structure, reliable work, high efficiency crushing, low dust content of finished stone, and is the good choice of second crushing stage machinery in quarry plant.
Model: PF1010
Rotor size: ∅1000x1050mm
Feeder opening size: 400x1080mm
Max feeding size: <300mm
Capacity: 50-90 tph
Motor power: 55kw
Applied material: Limestone, granite, dolomite, river stone, marble, silica, steel slag, feldspar, concrete and so on.
1.Large feed port, multi-chamber uniform crushing, less stone powder.
2. The gap between impact plate and hammer can be easily adjusted, and the discharge particle size and particle shape can be effectively controlled.
3. Compact structure, strong machine rigidity, rotor with large moment of inertia.
4. High chromium plate hammer, anti-impact, anti-wear, large impact.
5. Keyless link, easy maintenance, economical and reliable.
Although parameters determine production capacity, the production capacity of pf1010 has a range. Why is this happening? How can we increase its production and achieve higher processing capabilities? We can do this from the following aspects:
1. The particle size of raw material feeding is strictly controlled within the required range;
2. Keep raw materials fed into the feed port evenly and orderly, and do not be "oversaturated" to cause clogging of the cavity;
3. The finished aggregate must be delivered at a uniform speed to prevent it from affecting the high-speed operation of stone production;
4. The hardness and moisture content of the fed stone must be controlled within a reasonable range. Too hard stone will reduce the output of the stone crusher, on the contrary, it will increase.
Mobile impact crushers are used to recycle concrete and process natural rock. They are easy to move on and between job-sites, which allows operators to crush on smaller job-sites. They often come with an on-board vibrating screen to produce spec products eliminating the need for additional screening equipment on-site.
Impact crushers are traditionally classified to two main types: horizontal shaft impact (HSI) crushers and vertical shaft impact (VSI) crushers.
They are different crushing machine. Hammer crushers use a single hammer to strike and break the material, while impact crushers use a combination of hammers and a crushing plate to strike and shatter the material.
A jaw crusher uses compressive force to break down materials by squeezing them between two plates. Crushers are machines used to reduce the size of rocks, stones and other materials. Impact crushers use impact force to crush material. They are generally used for crushing soft materials and producing fine aggregate.
For example, if you're looking for a machine to break down rocks into smaller pieces for road construction, then an impact crusher is ideal. If you're looking for a machine to turn gravel into sand, then a cone crusher may be best.
Save Time! Get A Detailed Quotation Quickly.