Pros And Cons Of Single Cylinder Hydraulic Cone Crusher And Multi Cylinder Hydraulic Cone Crusher

In the previous article, we learned about the difference between single-cylinder hydraulic cone crusher and multi-cylinder hydraulic cone crusher. Recently, many customers have been asking about the advantages and disadvantages of single-cylinder hydraulic cone crusher and multi-cylinder hydraulic cone crusher. Next, we will talk about it in detail and add a few more easy-to-understand differences to help you choose a cone crusher better.

1. Single-cylinder Cydraulic Cone Crusher

Advantages:

1. The body structure of single-cylinder hydraulic cone crusher is simpler than that of multi-cylinder hydraulic cone crusher, and it has fewer parts. From the appearance, the design is more exquisite.

2. Due to the simple structure and low manufacturing cost, the price is also lower than that of multi-cylinder hydraulic cone crusher.

3. In the actual operation process, the equipment is easy to install and maintain. And from a technical perspective, the single-cylinder hydraulic cone crusher has made technical improvements to the sliding bearing. The improved equipment can adapt to higher speeds, increase the swing speed of the main shaft, make the size of the finished material more in line with the requirements, and the output is also higher.

Disadvantages:

The biggest disadvantage of a single-cylinder hydraulic cone crusher is that it has only one oil cylinder, so the crushing force is relatively small compared to a multi-cylinder one. If you need to crush some harder stones, it is recommended to choose a multi-cylinder one.

Multi-Cylinder Hydraulic Cone Crusher

Advantages:

1.The multi-cylinder hydraulic cone crusher has partially upgraded and improved the performance of the traditional spring cone crusher, and has a reasonable structure. The equipment uses multi-cylinder hydraulic technology to make the crushing of the crusher larger. While ensuring that the output meets the standard, the energy consumption is also controlled, and it is suitable for a large number of stones, especially for crushing stones with a hardness of no more than 300Mpa.

2.The multi-cylinder hydraulic has a special crushing chamber design, and the production capacity is greatly improved. The semi-automatic hydraulic adjustment of the discharge port can effectively control the stone particle size, and the finished material can reach the size you need. Therefore, it is more economical and practical to use.

3.When manufacturing multi-cylinder hydraulic cone crushers, good crusher manufacturers will use high-strength integral casting casings, and have iron protection, which is safe and reliable. No matter how hard the stone is, the equipment performance is very stable and has a long service life.

Disadvantages:

The multi-cylinder hydraulic cone crusher uses a labyrinth seal structure, which can prevent dust. However, if the manufacturer is not experienced or the manufacturing technology is not up to standard, the labyrinth seal will also allow dust to enter. If the stone with more dust is crushed, it may cause difficulty in adjusting the discharge port.

Difference between single-cylinder hydraulic cone crusher and multi-cylinder hydraulic cone crusher

1. Comparison of crushing effect: The multi-cylinder hydraulic cone crusher has a high content of fine material at the crushing outlet, better crushing effect, and better layered crushing effect. The single-cylinder hydraulic cone medium has better crushing effect and large passing capacity.

2. Comparison of actual production: When crushing soft ores and weathered ores, the single-cylinder hydraulic cone crusher has the advantage of large processing capacity, while when crushing medium and high hardness ores, the multi-cylinder hydraulic cone crusher is more prominent. In the case of fine crushing of medium-hard ores, under the same specifications, multi-cylinders can produce more qualified products. Generally speaking, the harder the hardness, the greater the difference.

3. Comparison of operation and maintenance: Single cylinder has a simple structure and reliable performance. A hydraulic cylinder has a simple and compact structure, low failure rate, and low production cost (the simpler the mechanical system structure, the lower the failure rate, the higher the reliability, and the more stable the operation). The top or side of the multi-cylinder can be disassembled for maintenance quickly and easily. All parts can be disassembled and repaired from the top or side, and the movable cone and top cone can be easily disassembled without disassembling the frame and fastening bolts, making daily replacement more convenient .