How to prolong service life of impact crusher

Impact crusher is widely used as secondary stage crusher in stone crushing plant. It is mainly used to crush many kinds of large, medium, small sized materials with compression resistance no more than 350Mpa, in the fields of highway, reservoir, railway, airport and other fields that need rock with cubic shape. It can crush limestone, granite, basalt, bluestone, etc with diameters of from 100mm to 500mm. PF impact crusher are ideal choice for crushing and screening.

From primay jaw crusher, the middle type stone will feed into impact crusher direclty. The materials are crushed via impact energy produced in the impact crusher. When the fine impact crusher works, with the help of the motor, the fine impact crusher’s rotor rotates fast, the material is crushed by the shock of rotor’s hammer in the first crushing zone, and being crushed in the second fine crushing zone, then discharged from the output.

The hammer on rotor is wearing parts. If the material does not well-proportioned, the hammer is easy to worn and the service life is shorter. Then how to prolong service life of impact crusher hammer? Distributor is a good tool. It could make the material neither too fast nor too slow into impact crusher. This could avoid large power impact to the rotor. Rotor with hammer will work under a uniform load. As a result, the service life of impact crusher is prolong as well.

What’s the distributor of impact crusher? Look at below pic in grey. More details, welcome to knock at us any time.